The 5 mm Safety Locking Screws – Self-Tapping – Stainless Steel 316L (140 pcs) are orthopedic fixation components designed for use with compatible locking plate systems. Supplied as a 140-piece set, these screws provide a convenient inventory of 5 mm locking fixation components for surgical facilities, orthopedic practices, and veterinary orthopedic applications where the corresponding system specifications are met.
The self-tapping design allows the screw to create its own thread in appropriately prepared bone during insertion, depending on the screw geometry and surgical technique. This can help streamline screw placement when the application and bone characteristics are suitable. The exact insertion technique, pilot-hole requirements, and instrumentation should always follow the manufacturer’s specifications and the surgeon’s established procedure.
A locking screw is designed to engage with a compatible threaded or locking feature in an orthopedic plate. When correctly matched, the screw head locks into the plate rather than relying solely on compression between the plate and bone. This fixed-angle relationship can provide a stable construct for selected fracture fixation and reconstructive orthopedic procedures.
The screws are specified as 5 mm in diameter and manufactured from 316L stainless steel. 316L stainless steel is widely used in medical applications because of its corrosion resistance and established mechanical properties. However, suitability for a specific implant application depends on the complete implant system, material specifications, manufacturing quality, regulatory status, and applicable clinical requirements.
The 140-piece quantity makes the set suitable for maintaining an organized supply of compatible locking screws. Screw lengths and other dimensional details are not specified in the product title and should be verified before use. The correct screw length must be selected according to plate thickness, bone anatomy, intended fixation depth, and the requirements of the applicable locking plate system.
These screws should not be assumed to be compatible with every 5 mm locking plate. Thread geometry, head design, pitch, screw length, plate locking interface, and instrumentation must correspond to the intended system. Components from different manufacturers or systems should only be combined when compatibility has been specifically confirmed.
Because these are implantable fixation components, handling should follow the supplied labeling, packaging, sterility information, and manufacturer instructions. They should not be modified, reused, or reprocessed unless specifically labeled and validated for that purpose.
The 5 mm Safety Locking Screws provide a practical supply of self-tapping stainless-steel locking fixation components for compatible orthopedic systems. Their 316L construction and 5 mm diameter make them suitable for applications where these specific implant characteristics are required and verified.
Key Features
- 5 mm locking screw diameter
- Self-tapping screw design
- Manufactured from 316L stainless steel
- Supplied as a 140-piece set
- Designed for compatible locking plate systems
- Supports fixed-angle orthopedic fixation
- Suitable for selected fracture fixation applications
- Helps maintain an organized supply of fixation screws
- Designed for controlled surgical insertion
- Screw length should be verified before clinical use
- Compatibility with the intended plate system must be confirmed
- Use according to applicable manufacturer and implant instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Type | Safety Locking Screws |
| Quantity | 140 Pieces |
| Diameter | 5 mm |
| Screw Design | Self-Tapping |
| Material | Stainless Steel 316L |
| Fixation Type | Locking / Fixed-Angle |
| Primary Application | Orthopedic Fracture Fixation |
| Plate Compatibility | Compatible locking plate systems only |
| Screw Length | Configuration dependent / verify before use |
| Head Design | Locking, system dependent |
| Sterility | Verify supplied packaging and labeling |
| Reuse | Follow manufacturer labeling; implant components should not be reused unless specifically designated |
| Instrument Compatibility | Verify corresponding screwdriver and instrumentation |
FAQs
What are 5 mm safety locking screws used for?
They are orthopedic fixation screws designed for use with compatible locking plates during selected fracture fixation and reconstructive procedures.
Are these screws self-tapping?
Yes. The listed screws feature a self-tapping design intended to facilitate thread formation during insertion when used according to the applicable surgical technique.
What material are these locking screws made from?
They are specified as stainless steel 316L.
How many screws are included?
The listed set contains 140 pieces.
Are these screws compatible with every 5 mm locking plate?
No. Compatibility should be confirmed based on the plate’s locking interface, thread geometry, screw design, dimensions, and manufacturer specifications.
What does 5 mm refer to?
The 5 mm specification refers to the stated screw diameter. The exact screw length and other dimensions depend on the supplied configuration.
Can these screws be reused?
Implantable fixation screws should not be reused or reprocessed unless the manufacturer specifically labels and validates them for such use. Follow the supplied implant instructions.
Do these screws require a special screwdriver?
The appropriate screwdriver depends on the screw-head design and locking system. The corresponding instrumentation should be verified before use.
Are these screws supplied sterile?
Sterility depends on the supplied product configuration and packaging. Always check the product labeling and packaging before clinical use.
Can these screws be used in veterinary orthopedic surgery?
Potential veterinary use depends on the product’s intended labeling, regulatory status, patient anatomy, and compatibility with the applicable veterinary plate system. It should not be assumed without confirmation.
Reviews
There are no reviews yet.