The Spratt Brun Bone Curette Bundle – Straight 26 cm, Fig. 0–00000 (Set of 5) is a specialized collection of long-handled surgical bone curettes designed for controlled bone curettage and manipulation. Spratt Brun curettes are available in straight configurations and are used within neurosurgical and orthopedic instrument ranges for procedures requiring access to deeper operative areas.
This bundle contains five straight curettes, covering figure sizes 0, 00, 000, 0000, and 00000. The graduated sizes provide different working-end options, allowing the surgical team to select a curette according to the anatomical location, operative access, and required degree of tissue or bone manipulation. Exact cup dimensions associated with each figure should be confirmed against the specific instrument specifications.
The 26 cm length provides extended reach for procedures where the operative site is located deeper within the surgical field. A long shaft can allow the working end to reach the intended area while keeping the handle outside the immediate operative corridor. This characteristic can be useful in selected neurosurgical and orthopedic applications.
The straight profile provides a direct alignment between the handle, shaft, and curette tip. This configuration may be useful when the surgical approach permits a relatively direct trajectory toward the target area. Straight curettes can provide controlled access without the additional change in direction associated with angled or curved working configurations.
Bone curettes are designed for controlled scraping, scooping, removal, or preparation of bone and selected tissue, depending on their working-end geometry. The Spratt Brun design features a small spoon-shaped curette tip intended for controlled bone scraping and related surgical manipulation.
The size range from Fig. 0 through Fig. 00000 gives the set a fine selection of working-end profiles. Smaller figures may be useful where a narrower working area is required, while the larger figure sizes can provide a broader curetting surface. Instrument selection should always be based on the specific procedure and intended function of the individual curette.
These curettes may be incorporated into neurosurgery, orthopedic surgery, spine surgery, and other bone-related procedures where controlled curettage is indicated. They can support selected cranial, spinal, and orthopedic applications, although the exact clinical use depends on the individual curette design and the surgeon’s established technique.
A five-piece bundle also helps simplify instrument organization. Keeping the different Spratt Brun sizes together allows surgical staff to prepare a dedicated curette group and select the appropriate size during the procedure. It can also make post-operative counting, inspection, cleaning, and reassembly more systematic.
The long, slender shafts and fine working ends require careful handling. Curette tips should not be used as levers or subjected to loads outside their intended function. Before use, each instrument should be inspected for tip deformation, cracks, corrosion, surface damage, and shaft alignment. Any instrument showing excessive wear or mechanical damage should be removed from service.
For reusable surgical instruments, cleaning and sterilization should follow validated instructions applicable to the exact instrument material and construction. Particular attention should be given to the curette cup, shaft transition, handle, and any areas where biological material may remain after use.
The Spratt Brun Bone Curette Set 5 Pcs 26 cm Straight is suitable for neurosurgical departments, orthopedic operating rooms, spine surgery centers, hospitals, and other professional medical facilities requiring a selection of long-handled straight bone curettes for controlled surgical manipulation.
Key Features
- 5-piece Spratt Brun bone curette bundle
- Straight configuration
- 26 cm instrument length
- Figure sizes 0, 00, 000, 0000, and 00000
- Designed for controlled bone curettage
- Long shaft provides extended surgical reach
- Multiple working-end sizes for procedural flexibility
- Suitable for selected neurosurgical applications
- Useful for orthopedic and spine procedures
- Fine spoon-shaped working ends for controlled scraping
- Organized five-piece configuration
- Reusable when supplied as reusable instruments and processed according to validated instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Spratt Brun Bone Curette Bundle |
| Set Quantity | 5 Pieces |
| Instrument Type | Surgical Bone Curettes |
| Configuration | Straight |
| Instrument Length | 26 cm |
| Figure Sizes | 0, 00, 000, 0000, 00000 |
| Primary Specialties | Neurosurgery / Orthopedics / Spine |
| Primary Function | Bone Curettage and Surgical Manipulation |
| Working End | Spoon / Cup Curette Profile |
| Shaft Design | Long / Straight |
| Applications | Cranial, Spinal, Orthopedic Procedures |
| Material | Surgical Instrument Material, Configuration Dependent |
| Reusable | Depending on Product Configuration |
| Sterilization | Follow Validated Reprocessing Instructions |
| Contents | 5 Straight Spratt Brun Curettes |
FAQs
What is the Spratt Brun bone curette used for?
A Spratt Brun bone curette is designed for controlled scraping, scooping, and manipulation of bone or selected tissue according to the working-end design.
How many curettes are included in this bundle?
The bundle contains 5 straight bone curettes.
Which sizes are included in the Spratt Brun set?
The set includes Fig. 0, Fig. 00, Fig. 000, Fig. 0000, and Fig. 00000.
What is the length of these curettes?
Each curette is specified as 26 cm long, providing extended reach for deeper operative fields.
What is the difference between the Spratt Brun figure sizes?
The figure numbers identify different curette sizes. The working-end dimensions increase or vary according to the specific figure, providing options for different surgical requirements.
What does a straight bone curette mean?
A straight bone curette has a direct shaft-to-working-end alignment, allowing the surgeon to approach the target using a relatively direct instrument trajectory.
Can Spratt Brun curettes be used in neurosurgery?
Yes. Spratt Brun bone curettes are included in neurosurgical instrument ranges and can support selected procedures involving controlled cranial or spinal bone manipulation.
Can these curettes be used for spine surgery?
Appropriately configured bone curettes may support selected spinal procedures where controlled bone preparation or curettage is required.
Why use five different curette sizes?
Different curette sizes allow the surgical team to select a working end appropriate to the anatomical area and the specific surgical task.
Are Spratt Brun bone curettes reusable?
They may be reusable when supplied and labeled for repeated clinical use. Reusable instruments must be appropriately cleaned, inspected, sterilized, and maintained.
How should these curettes be sterilized?
Cleaning and sterilization should follow validated instructions applicable to the exact instrument material and configuration. The manufacturer’s approved reprocessing method should take precedence.
What should be inspected before using the curettes?
Inspect each curette for working-end integrity, deformation, cracks, corrosion, shaft alignment, surface damage, and other signs of excessive wear before clinical use.
Reviews
There are no reviews yet.